Oregon OSHA

Construction Depotonline

Fall 2007
Safety & Health News for the Oregon Construction Industry

Oregon OSHA Home page

Electrical: Coated hand tools may not protect you from electrical hazards

By Ron Haverkost.

Recently, while removing lighting on a demolition project, a worker inadvertently cut an energized power cord with a pair of pliers that caused a spark and a hole in the cutting portion of the pliers. The worker used pliers with plastic-coated handles made for ergonomic comfort; however, this type of coating doesn’t insulate against electrical current and doesn’t provide a complete safety barrier.

Some hand tools such as electrically rated lineman’s pliers have insulated handles that are designed to withstand specific voltage levels - for example, 1000 volts a.c. The coated pliers that most workers use are not electrically rated. Insulated hand tools must be covered with material that protects the user from electric shock and minimizes the risk of a short circuit. The American Society for Testing and Materials (ASTM F1505) and the International Electrotechnical Commission (IEC 60900) specifies the requirements for selecting and using insulated hand tools.

Oregon OSHA’s Division 2/S and Division 3/K electrical safety rules require employers to have safe work practices that protect employees who work near or on energized equipment or circuits. Live parts that an employee may be exposed to must be de-energized before the employee works on or near them. If de-energizing live parts makes work more hazardous or is not feasible, employers must use other effective safe practices.

Never assume that a hand tool is acceptable for work on energized equipment because it has a plastic coating on its handles. Although insulated hand tools must meet specific industry standards, they provide only a partial barrier from electrical hazards. The safest way to work on electrical equipment is to make sure that it’s de-energized before you begin.

Ron Haverkost is a Technical Specialist in Oregon OSHA's Standards and Technical Resources Section.

Feel free to copy this newsletter | About This Newsletter | Oregon OSHA | Privacy Policy | Contact Us